Established in 1990, Fadong Power Co., Ltd. is a professional China brake motor manufacturer and supplier of in the emergency power supply industry. We not only specialize in manufacturing different kinds of generators, but also in motors, engines, diesels, gearmotors and other power supply products. We also have more than 100 series of equipment to support and check our products, such as VPI equipment, auto painting lines, auto testing systems and CAD systems. We warmly welcome every customer to cooperate with us on the basis of mutual benefit, and hope to be your faithful friend and best partner. Our custom brake motors has obtained the certifications of ISO9001-2000, GS/TUV, CE, VL, EPA, QHS, SON, CAP and SRS.

Pujol 80:1 Right Angled Gear motor including 63 Frame - 0.12kW 3ph 4 Pole AC Motor with holding duty brake for 230V and 400V 3 phase supply. Use at 0.9kW motor rating with Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.
Can be used over a 20:1 Speed Control range from 1.5RPM to 30RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 0.05kW (0.07HP) x 17RPM at 230V or 400V x 50Hz 3ph.
Service factor is 1.1 (based on 0.9kW rating)
Output Torque is 30Nm to 17RPM x 50Hz then reducing to 15Nm x 30RPM if used to 100Hz.
18mm diameter hollow output shaft. Requires output shaft, see separate item if required.
Mounting fixings on top, bottom and end or add the bolt on flange for output flange mounting.
Full Load Current - 0.65 at 230V, or 0.38A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.66 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake

Using a Bolt-on Brake from Inertia Dynamics to create a brake motor for a smaller frame assembly is simple and economical. The Bolt-on Brake is spring set and has a clamp-collar fitting for quick assembly. It can be easily mounted on most standard stepper and servo motors without custom components or special engineering. It is furnished with a built-in shaft that readily accepts a gearbox, a pulley or other parts. This low-cost brake is available for 17, 23, 34 and 42 frame sizes.The brake mounts on the rear C-flange of a standard NEMA motor. Simply connect the 3 leads to the AC power supply per the service manual directions and the brake is ready for operation.Electro brakes install as a single integral unit allowing for quick installation, inspection and repair. The Electro brake is impervious to coolant, water or dirt which leads to longer friction disc life.

Go to China Motor & Engine Manufacturer Catalog or China Motor & Engine Products Catalog to find more China Products!